RM Analyzer Help

Selection of OpenTcl Procedure

Beside any user defined and registered tcl procedure below 'Internal' and 'User' defined procedures are part of RM Bridge and can be used within OpenTcl.

Internal procedures

Procedure	Title	Description
LIST:ELEM	`DETAILED ELEMENT VALUES`	Printout Element Information to a list file. Input (Option 1): Element number
LIST:REINF	`REINFORCEMENT AREA`	Printout reinforcement areas at begin and end of all elements that are assigned to an element group. This list consider all reinforcement layers of type 'Bending', 'Cracking', 'Robustness' and 'Longitudinal'. Input: none
LIST:SREINF	`SHEAR REINFORCEMENT AREA LISTING`	Printout all reinforcement layers of type 'Shear for web', 'Shear longitudinal' and 'Torsion'. For each Attribute Set the related reinforcement areas, the capacity factors and theta angle are printout at begin and end of all elements that consist of this specific reinforcement layer. Input: none
LIST:SUMLIST	`LOAD CASE LIST`	Printout a list of all existing load case. Both load case force sum and mass sum in in global X/Y/Z-direction and omega are printout. Input: none
LIST:VOLUME	`VOLUME & WEIGHT - ACTIVE STRUCTURE`	Printout a list of all active elements that are assigned to an element group. Length, volume and weight of individual elements and sum for element groups are listed. Input: none
EXP:CE2000		Export tendon data to CE2000 import tcl file.
EXP:SYSRM7		Export structural data to RM7 sysin.dat file.

User defined procedures

Procedure	Title	Description
LST:CableLengths		Printout a list of all cable elements. Cable system length L(inp), stress free length L(0) and length under loading L(LC) are listed. Input (Option 1): Load case name (for cable 'loaded length')
LST:TendG	`TENDON GEOMETRY REPORT (GLOBAL)`	Printout tendon geometry of certain tendon in global coordinates. Input (Option 1): tendon number
LST:TendL	`TENDON GEOMETRY REPORT (LOCAL TO ELEMENTS)`	Printout tendon geometry of certain tendon in local element-coordinates. Input (Option 1): tendon number
LST:TendP	`TENDON GEOMETRY REPORT (LOCAL TO POINT)`	Printout tendon geometry of certain tendon in local coordinates relative to input cross section (geometry or stress) point. Input (Option 1): tendon number Input (Option 2): name of reference point (in cross section)